Water-Based Natural Stone Texture Effect Acrylic Paint for Exterior Wall Building Decoration
Product Parameter
| Packaging specification | 40 kg /bucket |
| Model NO. | BPZ-Z12 |
| Brand | Popar |
| Level | Finish coat |
| Substrate | Brick/Concrete |
| Main raw material | Acrylic |
| Drying method | Air drying |
| Packaging mode | Plastic bucket |
| Application | widely used in all kinds of high-end public buildings (such as hotels, office buildings, government buildings), villas and walls of various real estate projects. |
| Features | Made of natural colored sand. Good construction without flying sand, good color retention,better weather resistance. |
| Acceptance | OEM/ODM, Trade, Wholesale, Regional Agency |
| Payment method | T/T, L/C, PayPal |
| Certificate | ISO14001, ISO9001,French VOC a+ certification |
| Physical state | Liquid |
| Country of origin | Made in China |
| Production capacity | 250000 Ton/Year |
| Application method | Spray guns |
| MOQ | ≥20000.00 CYN (Min. Order) |
| Solid content | 52% |
| pH value | 8 |
| Weather resistance | More than 10 years |
| Shelf life | 2 years |
| Color | Refer to Popar's color cards, its available in a range of colors. |
| HS Code | 320990100 |
Product Application
Product Description
Exterior wall paint selects high-quality raw materials, does not add fragrance, and adopts advanced production technology. Nice Look and More Fashionable High-End Paint.Outstanding Functions and Better Quality Performance. Multiple Health Controls and Better Home Protection.
Product Features
1. The surface of the coating has a strong sense of sand and stone, fully showing the rich texture of natural stone.
2. Use natural crushed stone to show the color, which will not fade and remain beautiful for a long time.
3. Construction is not limited by the geometry of the building. It is suitable for a variety of base surfaces, creating a variety of natural stone patterns and textures, and giving the building the greatest beauty.
4. Super environmental protection and energy saving, water-based products, fully meet the national environmental protection requirements for architectural coatings.
5. Compared to traditional stone, the coating is lighter, which greatly reduces the wall load.
6. Super weather resistance, service life of more than 20 years.
7. Self-cleaning function (with high anti-pollution varnish): 90% of the dirt is difficult to adhere to, and after natural washing by rain, it is still as bright as new.
Direction For Use
Application instructions: The surface must be clean, dry, neutral, flat, and free of floating ash, oil stains and foreign matters. Water-leaking positions must undergo waterproof treatment. Before coating, the surface should be polished and leveled to ensure that the surface humidity of the pre-coated substrate is <10% and the pH value is<10. The coating surface effect depends on substrate evenness.
Application conditions: Wall temperature ≥ 5 ℃, humidity ≤ 85%, and good ventilation.
Application methods: Spray coating .(speacial spray guns).
Dilution ratio: It is not recommended to dilute with water.
Theoretical paint consumption: 3-5㎡/Kg (spraying). (The actual amount varies slightly due to the roughness and looseness of the base layer).
Recoating time: 30-60 minutes after surface drying, 2 hours after hard drying, and recoating interval is 2-3 hours (which may be duly extended under low-temperature and high-humidity conditions).
Points for attention :
1. After each batch of paint arrives at the construction site, be sure to spray 5-10m² on the wall, and confirm that the color and effect meet the standards before large-scale construction.
2. In large-scale construction, it is necessary to have a division effect and use a hanging basket for construction, so as to avoid the phenomenon of bar shadows and lanterns caused by the use of scaffolding construction;
3. The same paint must be used on the same wall. If you need to spray different batches of real stone paint on the same wall, you need to test the spray on site to confirm that there is no color difference before construction; each batch of materials saves 3.5 barrels for future maintenance use.
Maintenance time: 7 days/25℃, which may be duly extended under low-temperature and high-humidity conditions to obtain a solid film effect. In the process of paint film maintenance and daily use, it is suggested that doors and windows should be closed for dehumidification in high humidity weather (such as Wet Spring and Plum Rain).
Tool Cleaning : After or between applications, please clean the tools with clean water in time in order to prolong tool life. The packaging bucket can be recycled after cleaning, and packaging waste may be recycled for reuse.
Product construction steps
Product Display
Substrate Treatment
1. New wall: Thoroughly remove surface dust, oil stains, loose plaster, etc., and repair any holes to ensure that the wall surface is clean, dry and even.
2. Re-painting wall: Thoroughly remove the original paint film and putty layer, clean surface dust, and level, polish, clean and thoroughly dry the surface, so as to avoid problems left over from the old wall (odor, mildew, etc.) affecting the application effect.
*Before coating, the substrate should be checked; coating can only start after the substrate has passed acceptance inspection.
Precautions
1. Please work in a well-ventilated environment, and wear a protective mask when polishing the wall.
2. During construction, please configure necessary protective and labor protection products according to local operating regulations, such as protective glasses, gloves and professional spraying clothing.
3. If it gets into eyes accidentally, please rinse well with plenty of water and seek medical treatment immediately.
4. Do not pour the remaining paint liquid into the sewer to avoid clogging. When disposing of paint waste, please comply with local environmental protection standards.
5. This product must be sealed and stored in a cool and dry place at 0-40°C. Please refer to the label for details on production date, batch number and shelf life.
