Super Powerful Interface Treatment Adhesive Agent For Concrete Structure
Product Parameter
| Brand | Popar |
| Level | Primer |
| Substrate | Concrete/Brick |
| Main raw material | Polymer |
| Drying method | Air drying |
| Packaging mode | Plastic bucket |
| Acceptance | OEM/ODM, Trade, Wholesale, Regional Agency |
| Payment method | T/T, L/C, PayPal |
| Certification | ISO14001, ISO9001 |
| Physical state | Liquid |
| Country of origin | Made in China |
| Production capacity | 250000 Ton/Year |
| Application method | Brush / Roller / Spray guns |
| MOQ | ≥20000.00 CYN (Min. Order) |
| pH value | 7-9 |
| Solid content | 35%±1 |
| Viscosity | ＜100KU |
| Stroge life | 2 years |
| HS Code | 3506100090 |
Product Application
Product Description
Scope of application: This product can be used as a treatment material for improving smooth surfaces such as mortar layers, new and old cement concrete layers, cast-in-place concrete layers, new and old tiles, mosaics, and vitrified tiles.
Product Features
Excellent moisture-proof, anti-mildew and other sealing functions ·Excellent alkali resistance. Excellent water resistance ·Excellent adhesive force.
Direction For Use
How to use: Mix the liquid material and the powder material at a ratio of 1:1.5 (no water added) and then stir with an electric mixer. The interface agent for the smooth surface substrate of the sign is a two component product. The product is mixed with liquid and powder materials. It can be used effectively to improve the strength of the loose base layer and avoid problems such as hollowing, shedding, shrinkage and cracking of the plaster layer.
After mixing evenly, it can be applied by brush, roller or spray.
Points for attention :
1. The solidified slurry is difficult to remove. After the tool is used, it should be cleaned with water as soon as possible.
2. Ventilation must be strengthened, and natural maintenance is sufficient. After the slurry is hard-dried and the base surface is completely sealed, the subsequent process can be carried out.
3. It should be placed in a cool and dry place, the temperature should not be lower than 5°C or higher than 40°C, and it should not be squeezed, tilted and stacked upside down.
4. Please wear protective gloves and goggles during construction. If it comes into contact with eyes and skin, rinse thoroughly with clean water immediately, and seek medical attention immediately if you feel unwell.
Product construction steps
Product Display
