Efficient Anti-alkali Primer for interior wall paint
Product Parameter
| Ingredients | Water, water-based deodorizing emulsion, environmental pigment, environmental additive |
| Viscosity | 113Pa.s |
| pH value | 7.5 |
| Drying time | Surface dry in 2 hours |
| Solid content | 54% |
| Proportion | 1.3 |
| Country of origin | Made in China |
| Model NO. | BPR-680 |
| Physical state | White viscous liquid |
Product Application
Product Construction
Coating system and coating times
Base surface treatment: remove dust, oil stains, cracks, etc. on the base surface, spray glue or interface agent to increase adhesion and alkali resistance.
Putty scraping: Fill the uneven part of the wall with low alkaline putty, scrape twice horizontally and vertically alternately, and smooth it with sandpaper after scraping each time.
Primer: Brush a layer with a special primer to increase coating strength and adhesion of the paint.
Brush topcoat: according to the type and requirements of the paint, brush two to three topcoats, wait for drying between each layer, and refill putty and smooth.
Points to Attention
Construction and use suggestions
1. Carefully read the instructions for using this product before construction.
2. It is recommended to try it in a small area first, and if you have any questions, please consult on time before using it.
3. Avoid storage at low temperatures or exposure to sunlight.
4. Use according to product technical instructions.
Executive standard
This product fully complies with National/Industry Standards:
GB18582-2008 "Limits of Hazardous Substances in Adhesives for Interior Decoration Materials"
GB/T 9756-2018 "Synthetic Resin Emulsion Interior Wall Coatings"
Product construction steps
Product Display
