White Wood Adhesive Glue for Wood Furniture Paper Leather Handcraft
Product Parameter
| Packaging specification | 50kg /bucket |
| Model NO. | BPB-920 |
| Brand | Popar |
| Level | Finish coat |
| Main raw material | PVA |
| Drying method | Air drying |
| Packaging mode | Plastic bucket |
| Application | Woodwork, skirting boards, picture frame wires |
| Features | High flatness, high hardness, good powder coating, no foaming |
| Acceptance | OEM/ODM, Trade, Wholesale, Regional Agency |
| Payment method | T/T, L/C, PayPal |
| Certificate | ISO14001, ISO9001, French VOC a+ certification |
| Physical state | Liquid |
| Country of origin | Made in China |
| Production capacity | 250000 Ton/Year |
| Application method | Brush |
| MOQ | ≥20000.00 CYN (Min. Order) |
| pH value | 6-7.5 |
| Solid content | 20±1% |
| Viscosity | 20000-30000Pa.s |
| Stroge life | 2 years |
| Color | White |
| HS Code | 3506100090 |
Product Application
Product Description
It is suitable for woodwork, skirting boards, picture frame wires.
Product Features
High flatness, high hardness, good powder coating, no foaming
Direction For Use
Instructions for use of the product:
1. The joint surface must be clean and dry.
2. Apply the glue on the joint surface, press it until it solidifies, and keep it at room temperature for 24 hours to reach the use strength.
Scope of application:
Suitable for home decoration, office and large-scale decoration and renovation projects, or for repairing the joints of gypsum boards and polyester boards; after being mixed with putty powder, it can be used as a ceiling batch (filling, cloth strips, pasting kraft paper) For direct use, mix 1 part of putty powder with 4 parts of glue; mix 1 part of putty powder with wall glue to 5 parts of water).
Dosage:
1KG/5㎡
Precautions:
1. The air humidity is above 90%, and the temperature is below 5°C. It is not suitable for construction.
2. Before construction, check whether the board is flat.
3. The amount of glue applied should be applied according to the standard, not too much or too little.
4. After the board is glued, the pressure must be balanced.
5. This product should be stored at 5°C-35°C. If the temperature is too low and the product is obviously frozen or thickened, it should be transferred to a warm warehouse above 15°C and stored for more than 24 hours. If the viscosity returns to normal, it will not affect normal use. Vigorous heating should be avoided. This product should be kept airtight to prevent the surface of the glue from drying out. If the surface is dry and crusted, it will not affect oral administration after peeling off.
Storage life:
This product is a mixture. After long-term storage, a small amount of water will precipitate on the surface, which is a normal phenomenon, and it will not affect the use after stirring evenly.
Avoid freezing and direct sunlight, and keep sealed in a cool (5°C-35°C) dry place for 24 months.
Product Display
